adms-12
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| adms-12 [2024/07/17 19:15] – [Yaesu ADMS-12] KD6KPC | adms-12 [2024/12/18 10:00] (current) – [Yaesu ADMS-12] kd6kpc | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | |||
| - | |||
| ====== Yaesu ADMS-12 ====== | ====== Yaesu ADMS-12 ====== | ||
| * [[https:// | * [[https:// | ||
| - | The Yaesu ADMS-12 software is specifically for programming the [[ftm-300|Yaesu FTM-300DR]] radio. | + | The **Yaesu ADMS-12** software is specifically |
| - | The radio is shipped with a micro-USB cable. This cable is NOT for programming the radio. It is only for performing firmware updates. The cloning cable is the SCU-20 which must be purchased separately. | + | ===== Export File Disclaimer ===== |
| - | An alternative and preferred method for programming the radio is with a microSD card. A microSD card is not included | + | The export files provided are offered **"as-is" |
| - | RepeaterBook recommends a [[https:// | + | These files are generated based on current data and evolving search queries, which may affect their structure and content. Additionally, |
| - | ===== Importing / Exporting ===== | + | Our ability to provide support for these export files is limited due to resource availability and the inherent challenges of addressing issues arising from third-party software or hardware. |
| - | The software can import | + | By using these files, you acknowledge |
| - | * CSV | ||
| - | * FTM100D/ | ||
| - | * FT2D format | ||
| - | * FT3D format | ||
| + | ===== Programming the FTM-300DR ===== | ||
| - | This version of the ADMS software | + | The FTM-300DR ships with a **micro-USB cable**, but this cable is **NOT for programming |
| - | The FTM-300DR supports 999 memory channels. | + | - **SCU-20 Cloning Cable**: This cable must be purchased separately. |
| + | - **MicroSD Card (Preferred Method)**: | ||
| + | A microSD card can be used for programming the radio. RepeaterBook recommends a [[https:// | ||
| + | |||
| + | Alternatively, | ||
| + | |||
| + | ===== Importing / Exporting ===== | ||
| + | |||
| + | The ADMS-12 software | ||
| + | - **CSV** | ||
| + | - **FTM-100D/ | ||
| + | - **FT2D format** | ||
| + | - **FT3D format** | ||
| + | |||
| + | The FTM-300DR supports **999 memory channels**. RepeaterBook fully supports ADMS-12 exports, enabling seamless integration with its database. | ||
| ===== Supported Searches ===== | ===== Supported Searches ===== | ||
| + | |||
| + | Below is a list of supported searches for use with the ADMS-12 software: | ||
| ^ Search Page ^ North America | ^ Search Page ^ North America | ||
| - | | **Favorite** | + | | **Favorite** |
| - | | **Feature** | + | | **Feature** |
| - | | **Keyword** | + | | **Keyword** |
| - | | **Location** | + | | **Location** |
| - | | **Multi-County** | + | | **Multi-County** |
| - | | **Multi-State** | + | | **Multi-State** |
| - | | **Proximity** | + | | **Proximity** |
| - | | **Proximity 2.0** | <color green> | + | | **Proximity 2.0** | <color green> |
| - | | **Quick** | + | | **Quick** |
| - | | **Travel** | + | | **Travel** |
| ===== CSV Format ===== | ===== CSV Format ===== | ||
| - | There are no header field names in the file. RepeaterBook defaults | + | When exporting data in CSV format, there are **no header field names** in the file. Below are the field defaults supported by RepeaterBook: |
| - | ^Field Name ^ Field Value| | + | ^ Field Name |
| - | |Channel No | Sequential | + | | **Channel No** | Sequential |
| - | |Receive Frequency|| | + | | **Receive Frequency** | The frequency of the repeater |
| - | |Offset Frequency| Shift in MHz| | + | | **Offset Frequency** |
| - | |Offset Direction| -RPT, +RPT, -/+, OFF| | + | | **Offset Direction** |
| - | |Operating Mode| AM, **FM**| | + | | **Operating Mode** |
| - | |DIG/ | + | | **DIG/ANALOG** |
| - | |Name|| | + | | **Name** |
| - | |Tone Mode| OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER| | + | | **Tone Mode** | OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER | |
| - | |CTCSS Frequency| Repeater uplink tone or **88.5**| | + | | **CTCSS Frequency** | Repeater uplink tone or **88.5** |
| - | |DCS Code| Repeater uplink DCS Code or **023**| | + | | **DCS Code** |
| - | |User CTCSS| **1600 Hz** | | + | | **User CTCSS** |
| - | |RX DG-ID| Downlink DG-ID or **RX 00**| | + | | **RX DG-ID** |
| - | |TX DG-ID| Uplink DG-ID or **TX 00**| | + | | **TX DG-ID** |
| - | |TX Power| **HIGH**, MID, LOW| | + | | **TX Power** |
| - | |M-GRP| **OFF**| | + | | **M-GRP** | **OFF** |
| - | |SCAN| **YES**, NO| | + | | **SCAN** |
| - | |Step| **5.0KHz**| | + | | **Step** |
| - | |Narrow|**OFF**| | + | | **Narrow** |
| - | |Clock Shift|**OFF**| | + | | **Clock Shift** | **OFF** |
| - | |Comment|| | + | | **Comment** | Optional comment |
| ===== Limitations ===== | ===== Limitations ===== | ||
| - | The RepeaterBook export automatically filters | + | The RepeaterBook export automatically filters |
| + | - Unsupported | ||
| + | - Unsupported | ||
| + | |||
| + | The FTM-300DR supports frequencies between **100 MHz** and **1000 MHz**. Frequencies outside this range will not be included in the export. | ||
| + | |||
| + | ===== Additional Resources ===== | ||
| - | The frequencies exported are between 100 MHz and 1000 Mhz. | + | * [[https:// |
| + | * [[https:// | ||
| + | * [[https:// | ||
adms-12.1721261745.txt.gz · Last modified: 2024/09/29 10:36 (external edit)