Differences

This shows you the differences between two versions of the page.

--- adms-12 [2024/07/17 19:16] – [Yaesu ADMS-12] KD6KPC
+++ adms-12 [2024/12/18 10:00] (current) – [Yaesu ADMS-12] kd6kpc
@@ Line 1: / Line 1: @@
 ====== Yaesu ADMS-12 ======
   * [[https://www.yaesu.com/downloadFile.cfm?FileID=16512&FileCatID=42&FileName=FTM%2D300D%5FADMS%2D12%5FENG.zip&FileContentType=application%2Fx%2Dzip%2Dcompressed|Download]]
-The Yaesu ADMS-12 software is specifically for programming the [[ftm-300|Yaesu FTM-300DR]] radio. Also, the transceiver parameters and the setup menu items may be edited and configured.
+The **Yaesu ADMS-12** software is specifically designed for programming the [[ftm-300|Yaesu FTM-300DR]] radio. It allows you to edit and configure the transceiver parameters and setup menu items.
-The radio is shipped with a micro-USB cable. This cable is NOT for programming the radio. It is only for performing firmware updates. The cloning cable is the SCU-20 which must be purchased separately.
+===== Export File Disclaimer =====
-An alternative and preferred method for programming the radio is with a [[https://amzn.to/3SbeZbg]|microSD card]]. A microSD card is not included with the radio but can be purchased separately.
+The export files provided are offered **"as-is"** with no guarantees, warranties, or representations of any kind regarding their functionality, compatibility, or usability with any manufacturer's radio programming software.
-RepeaterBook recommends a [[https://amzn.to/3SbeZbg]|microSD card no larger than 32 GB]]. The radio is not capable of reading larger cards. The card featured above has been tested in two separate FTM-300DRs and has worked perfectly.
+These files are generated based on current data and evolving search queries, which may affect their structure and content. Additionally, compatibility may be influenced by limitations, bugs, or undocumented features in manufacturer software, over which we have no control.
-===== Importing / Exporting =====
+Our ability to provide support for these export files is limited due to resource availability and the inherent challenges of addressing issues arising from third-party software or hardware.
-The software can import and export in the following formats:
+By using these files, you acknowledge and accept these conditions. It is your responsibility to verify the data and its suitability for your specific needs.
-  * CSV
-  * FTM100D/400D format
-  * FT2D format
-  * FT3D format
+===== Programming the FTM-300DR =====
-This version of the ADMS software is supported by RepeaterBook. A full list of the supported searches can be found [[adms-12#Supported Searches|below]].
+The FTM-300DR ships with a **micro-USB cable**, but this cable is **NOT for programming the radio**. It is only for performing firmware updates. To program the radio, you need one of the following:
-The FTM-300DR supports 999 memory channels.
+  - **SCU-20 Cloning Cable**: This cable must be purchased separately.
+  - **MicroSD Card (Preferred Method)**:
+    A microSD card can be used for programming the radio. RepeaterBook recommends a [[https://amzn.to/3SbeZbg|microSD card no larger than 32 GB]] as the FTM-300DR cannot read larger cards. The card linked above has been tested successfully on multiple FTM-300DR units.
+Alternatively, you can use the [[https://amzn.to/4d6q7OJ|RT Systems programmer]] as a substitute for the ADMS-12 software.
+===== Importing / Exporting =====
+The ADMS-12 software supports importing and exporting in the following formats:
+  - **CSV**
+  - **FTM-100D/400D format**
+  - **FT2D format**
+  - **FT3D format**
+The FTM-300DR supports **999 memory channels**. RepeaterBook fully supports ADMS-12 exports, enabling seamless integration with its database.
 ===== Supported Searches =====
+Below is a list of supported searches for use with the ADMS-12 software:
 ^ Search Page      ^ North America    ^ Rest of World       ^
-| **Favorite**         | <color green>Operational</color>| <color green>Operational</color> |
+| **Favorite**         | <color green>Operational</color> | <color green>Operational</color> |
-| **Feature**          | <color green>Operational</color>| <color green>Operational</color>|
+| **Feature**          | <color green>Operational</color> | <color green>Operational</color> |
-| **Keyword**          | <color green>Operational</color>| <color green>Operational</color>|
+| **Keyword**          | <color green>Operational</color> | <color green>Operational</color> |
-| **Location**         | <color green>Operational</color>| <color green>Operational</color>|
+| **Location**         | <color green>Operational</color> | <color green>Operational</color> |
-| **Multi-County**     | Development Planned    |                |
+| **Multi-County**     | Development Planned              |                                   |
-| **Multi-State**      | Development Planned   |                     |
+| **Multi-State**      | Development Planned              |                                   |
-| **Proximity**        | <color green>Operational</color>| <color green>Operational</color>|
+| **Proximity**        | <color green>Operational</color> | <color green>Operational</color> |
-| **Proximity 2.0**    | <color green>Operational</color> | <color green>Operational</color>|
+| **Proximity 2.0**    | <color green>Operational</color> | <color green>Operational</color> |
-| **Quick**            | <color green>Operational</color>| <color green>Operational</color>|
+| **Quick**            | <color green>Operational</color> | <color green>Operational</color> |
-| **Travel**           | <color green>Operational</color>| <color green>Operational</color>                    |
+| **Travel**           | <color green>Operational</color> | <color green>Operational</color> |
 ===== CSV Format =====
-There are no header field names in the file. RepeaterBook defaults are **BOLD**.
+When exporting data in CSV format, there are **no header field names** in the file. Below are the field defaults supported by RepeaterBook:
-^Field Name ^ Field Value|
+^ Field Name       ^ Field Value                                                         ^
-|Channel No | Sequential beginning with 1 |
+| **Channel No**   | Sequential starting with 1                                          |
-|Receive Frequency||
+| **Receive Frequency** | The frequency of the repeater                                   |
-|Offset Frequency| Shift in MHz|
+| **Offset Frequency**  | Shift in MHz                                                   |
-|Offset Direction| -RPT, +RPT, -/+, OFF|
+| **Offset Direction**  | -RPT, +RPT, -/+, OFF                                           |
-|Operating Mode| AM, **FM**|
+| **Operating Mode**    | AM, **FM**                                                     |
-|DIG/ANALOG| FM, AMS, DN|
+| **DIG/ANALOG**        | FM, AMS, DN                                                   |
-|Name||
+| **Name**              | Channel name                                                  |
-|Tone Mode| OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER|
+| **Tone Mode**         | OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER            |
-|CTCSS Frequency| Repeater uplink tone or **88.5**|
+| **CTCSS Frequency**   | Repeater uplink tone or **88.5**                               |
-|DCS Code| Repeater uplink DCS Code or **023**|
+| **DCS Code**          | Repeater uplink DCS Code or **023**                           |
-|User CTCSS| **1600 Hz** |
+| **User CTCSS**        | **1600 Hz**                                                   |
-|RX DG-ID| Downlink DG-ID or **RX 00**|
+| **RX DG-ID**          | Downlink DG-ID or **RX 00**                                   |
-|TX DG-ID| Uplink DG-ID or **TX 00**|
+| **TX DG-ID**          | Uplink DG-ID or **TX 00**                                     |
-|TX Power| **HIGH**, MID, LOW|
+| **TX Power**          | **HIGH**, MID, LOW                                            |
-|M-GRP| **OFF**|
+| **M-GRP**             | **OFF**                                                      |
-|SCAN| **YES**, NO|
+| **SCAN**              | **YES**, NO                                                  |
-|Step| **5.0KHz**|
+| **Step**              | **5.0 kHz**                                                  |
-|Narrow|**OFF**|
+| **Narrow**            | **OFF**                                                      |
-|Clock Shift|**OFF**|
+| **Clock Shift**       | **OFF**                                                      |
-|Comment||
+| **Comment**           | Optional comment                                              |
 ===== Limitations =====
-The RepeaterBook export automatically filters unsupported frequencies and digital modes.
+The RepeaterBook export automatically filters out:
+  - Unsupported frequencies
+  - Unsupported digital modes
+The FTM-300DR supports frequencies between **100 MHz** and **1000 MHz**. Frequencies outside this range will not be included in the export.
+===== Additional Resources =====
-The frequencies exported are between 100 MHz and 1000 Mhz.
+  * [[https://www.repeaterbook.com/|RepeaterBook Home]]
+  * [[https://www.yaesu.com/|Yaesu USA Official Website]]
+  * [[https://www.youtube.com/watch?v=1GzaNm1QsMo|Programming Tips for Yaesu Radios]]