RepeaterBook Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Icom CS-52 Export ======

The CS-52 Programming software allows for PC-based programming of the [[icom_id_52|Icom ID-52A]].

[[https://www.icomjapan.com/support/firmware_driver/3433/|Cloning Software]]


The Icom ID-52A is a 2-m and 70-cm analog and D-Star mobile HT. Exports to this radio are limited to those bands.

The following information is for Version 1.21 (2021/12/01) CS-52 programming software.
===== Supported Searches =====

^ Search Page      ^ North America    ^ Rest of World       ^
| Favorite         | <color orange>In Development</color>  | <color orange>In Development</color>  |
| Feature          | <color green>Operational</color>  | <color orange>In Development</color>  |
| Keyword          | <color green>Operational</color>  | <color orange>In Development</color>   |
| Location         | <color green>Operational</color>  | <color orange>In Development</color> |
| Multi-County     | <color orange>In Development</color>  |                     |
| Multi-State      | <color orange>In Development</color>  |                     |
| Proximity        | <color green>Operational</color>  | <color orange>In Development</color> |
| Proximity 2.0    | |
| Quick            | <color green>Operational</color>  | <color orange>In Development</color> |
| Nationwide       | <color orange>In Development</color>  | <color orange>In Development</color>   |
| Special Modes    | <color orange>In Development</color>  | <color orange>In Development</color> |
| Travel           | <color green>Operational</color>  |                     |

===== Export/Import Parameters =====

^Field Name ^ Value |
|Group No| **0** |
|Group Name| |
|Ch No | Auto-incremented, beginning at 0.|
|Name| Callsign, the nearest city, and landmark. Limited to 16 characters.|
|Frequency| Repeater downlink frequency. |
|Dup| OFF, DUP+, DUP- |
|Offset| The repeater's transmit offset. (0.6, 5)|
|TS| RepeaterBook defaults to 25kHz. |
|Mode| FM for analog. FM-N for narrow analog. DV for D-Star. |
|SKIP| RepeaterBook defaults to Off. |
|TONE| Uplink tone - OFF, TONE, TSQL, TSQL-R, DTCS, DTCS-R, DTCS(T), Tone(T)/DTCS(R), DTCS(T)/TSQL(R), TONE(T)/TSQL(R).|
|Repeater Tone| Uplink tone. (88.5Hz)|
|TSQL Frequency| Repeater Downlink tone.|
|DTCS Code| Uplink digital code.|
|DTCS Polarity| Both N, TN-RR, TR-RN, Both R.|
|DV SQL| OFF, DSQL, CSQL.|
|DV CSQL Code| RepeaterBook defaults to 0.|
|Your Call Sign| RepeaterBook defaults to CQCQCQ.|
|RPT1 Call Sign| RepeaterBook defaults to Null.|
|RPT2 Call Sign| RepeaterBook defaults to Null.|



===== Digital Repeater List (RGL) =====

In the CS-52 programming software, a list of analog or D-Star repeaters can be added to the Digital Repeater List as groups. Even though the menu tree is labeled "Digital," the software will accept analog repeaters.

This list includes GPS data for each repeater. With its onboard GPS capabilities, your radio will locate the closest repeater to your current location.

Oddity
The Repeater Group List was intended by ICOM for use with Digital D-Star repeaters. In the D-Star worlds, two repeaters on the same band will not utilize the same call sign without some sort of suffix (identifier). When importing analog repeaters from RepeaterBook into the Digital Repeater List and two repeaters on the same band have the same callsign, it will display an error. Each duplicate call sign will have a caution flag next to it. You must manually add a suffix identifier to each call sign. You can ignore the error, and the software will delete the duplicate call signs, which might be acceptable for your needs. RepeaterBook recommends adding a single or two-digit number to the duplicate call signs. D-Star repeaters add a letter. S-Star suffix codes area automatically added in the RepeaterBook export.
RepeaterBook Wiki

User Tools

Site Tools

Page Tools
