User Tools

Site Tools


radios:anytone_d868uv_cps

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
radios:anytone_d868uv_cps [2020/11/24 11:12]
kd6kpc [Import/Export Fields]
radios:anytone_d868uv_cps [2022/10/16 17:44]
kd6kpc [Anytone AT-D868UV CPS]
Line 1: Line 1:
 ====== Anytone AT-D868UV CPS ====== ====== Anytone AT-D868UV CPS ======
 +{{:radios:d868uv.jpg?400|}}
  
 To see information on the data for the radio, please refer to [[radios:anytone_d868uv|Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio]]. To see information on the data for the radio, please refer to [[radios:anytone_d868uv|Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio]].
  
-The current version of the CPS software can be downloaded [[https://bridgecomsystems.freshdesk.com/support/solutions/articles/63000105671-anytone-868-cps-firmware-and-driver-versions|here]], courtesy of BridgeCom System.+The current version of the CPS software can be downloaded [[https://support.bridgecomsystems.com/anytone-868-handheld-cps-firmware-and-driver-downloads|here]], courtesy of BridgeCom System.
  
 The RepeaterBook export has been tested with version 1.39 CPS. The RepeaterBook export has been tested with version 1.39 CPS.
Line 10: Line 11:
  
 ^ Search Page      ^ North America    ^ Rest of World       ^ ^ Search Page      ^ North America    ^ Rest of World       ^
-| Feature          | Not Supported    Not Supported                   +| Call             | <color orange>In Development</color>    | <color orange>In Development</color> |   
-| Keyword          | Not Supported    Not Supported                   +| Favorite         | <color green>Operational</color> | <color orange>In Development</color>
-| Location         Supported        Supported           +| Feature          | <color green>Operational</color>  |<color green>Operational</color>  
-| Multi-County     Not Supported                        +| Keyword          | <color green>Operational</color> |<color green>Operational</color> 
-| Multi-State      | Not-Supported                        +| Location         <color green>Operational</color><color green>Operational</color>  
-| Proximity        | Supported        Supported           +| Multi-County     <color orange>In Development</color>                    
-| Quick            | Supported        Supported           +| Multi-State      | <color orange>In Development</color>                    
-| Nationwide       Not Supported    |                     | +| Proximity        | <color green>Operational</color><color green>Operational</color>
-| Special Modes    | Supported        Supported           +| Quick            | <color green>Operational</color><color green>Operational</color>
-| Travel           Not Supported    |                     |+| Nationwide       <color orange>In Development</color> |                     | 
 +| Special Modes    | <color green>Operational</color><color green>Operational</color>
 +| Travel           <color green>Operational</color> |                     |
  
  
Line 33: Line 36:
 |Receive Frequency| Downlink frequency. | |Receive Frequency| Downlink frequency. |
 |Transmit Frequency| Uplink frequency. | |Transmit Frequency| Uplink frequency. |
-|Channel Type| +|Channel Type|A-Analog for an analog-only channel (default for analog channels), D-Digital for a digital-only channel (default for DMR channels), A+D TX A for mixed analog (allow receive analog and digital signalTX is analog), D+A TX D for mixed digital (allow receive of analog and digital signal. TX is digital.)
-  * A-Analog for an analog-only channel. Repeaterbook default for analog channels+|Transmit Power| Low is 0.5 wattsMid is 1 watt**High is 2.5 watts**Turbo is 6 watts.| 
-  * D-Digital for a digital-only channel. Repeaterbook default for DMR channels+|Band Width| 12.5K is default for DMR repeaters. 25K is the default for analog repeaters.|
-  * A+D TX A for mixed analogallow receive analog and digital signalTX is analog+
-  * D+A TX D for mixed digitalallow receive of analog and digital signal. TX is digital.| +
-|Transmit Power| +
-  * Low is 0.5 watts+
-  * Mid is 1 watt+
-  * **High is 2.5 watts**+
-  * Turbo is 6 watts.| +
-|Band Width| +
-  * 12.5K. Repeaterbook default for DMR repeaters. +
-  * 25K. Repeaterbook default for analog repeaters.|+
 |CTCSS/DCS Decode| Repeater downlink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable.| |CTCSS/DCS Decode| Repeater downlink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable.|
 |CTCSS/DCS Encode| Repeater uplink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable. | |CTCSS/DCS Encode| Repeater uplink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable. |
Line 52: Line 45:
 |Contact TG/DMR ID| **1**.| |Contact TG/DMR ID| **1**.|
 |Radio ID| **Null**.| |Radio ID| **Null**.|
-|Busy Lock/TX Permit| +|Busy Lock/TX Permit| AlwaysChannelFreeDifferent Color CodeSame Color Code (default for DMR repeaters), Off (default for analog repeaters), RepeaterBusy.| 
-  * Always+|Squelch Mode|CarrierCTCSS/DCS|
-  * ChannelFree+
-  * Different Color Code+
-  * Same Color Code. Default for DMR repeaters+
-  * Off. Default for analog entries. +
-  * Repeater+
-  * Busy.| +
-|Squelch Mode| +
-  * Carrier +
-  * CTCSS/DCS|+
 |Optional Signal| Repeaterbook defaults to **Off**.| |Optional Signal| Repeaterbook defaults to **Off**.|
-DTMF ID| Repeaterbook defaults to **1**.| +|DTMF ID| **1**.| 
-|2Tone ID| Repeaterbook defaults to **1**.| +|2Tone ID| **1**.| 
-|5Tone ID| Repeaterbook defaults to **1**.| +|5Tone ID| **1**.| 
-|PTT ID| Repeaterbook defaults to **Off**.|+|PTT ID| **Off**.|
 |Color Code| For DMR it is the repeater's color code. For analog, Repeaterbook defaults to **1**.| |Color Code| For DMR it is the repeater's color code. For analog, Repeaterbook defaults to **1**.|
-|Slot| Repeaterbook defaults to **1**.| +|Slot| **1**.| 
-|CH Scan List| Repeaterbook defaults to **None**.| +|CH Scan List| **None**.| 
-|Receive Group List| Repeaterbook defaults to **None**.| +|Receive Group List| **None**.| 
-|TX Prohibit| Repeaterbook defaults to **Off**.| +|TX Prohibit| **Off**.| 
-|Reverse| Repeaterbook defaults to **Off**.| +|Reverse| **Off**.| 
-|Simplex TDMA| Repeaterbook defaults to **Off**.| +|Simplex TDMA| **Off**.| 
-TDMA Adaptive| Repeaterbook defaults to **Off**.| +|TDMA Adaptive| **Off**.| 
-|Encryption Type| Repeaterbook defaults to **Normal Encryption**.| +|Encryption Type| **Normal Encryption**.| 
-|Digital Encryption| Repeaterbook defaults to **Off**.| +|Digital Encryption| **Off**.| 
-|Call Confirmation| Repeaterbok defaults to **Off**.| +|Call Confirmation| **Off**.| 
-|Talk Around| Repeaterbook defaults to **On**.| +|Talk Around| **On**.| 
-|Work Alone| Repeaterbokk defaults to **Off**.| +|Work Alone| **Off**.| 
-|Custom CTCSS| Repeaterbook defaults to **251.1**.| +|Custom CTCSS| **251.1**.| 
-|2Tone Decode| Repeaterbook defaults to **0**.| +|2Tone Decode| **0**.| 
-|Ranging| Repeaterbook defaults to **Off**.| +|Ranging| **Off**.| 
-|Through Mode| Repeaterbook defaults to **Off**.| +|Through Mode| **Off**.| 
-|APRS Report| Repeaterbook default it **Off**.| +|APRS Report| **Off**.| 
-|APRS Report Channel| Repeaterbook default is **1**.|+|APRS Report Channel| **1**.|
  
 =====Export Notes===== =====Export Notes=====
-Many users have noticed there is sometimes a discrepancy between the number of rows shown on the website versus what is actually exported. This is caused by the export working to remove any repeaters that operate in modes that are not supported by the radio, such as D-Star.+This radio can only transmit and receive in analog FM and DMR modes. All other modes are automatically filtered out except when other modes are specifically selected.
  
 +This automatic filtering of unsupported modes may cause a discrepancy between the number of rows shown in the search results versus what is exported. 
 +
 +===== Help =====
 +
 +  * [[https://youtu.be/t-6HrOHMIk0|Repeaterbook YouTube Tutorial]]
 +  * [[https://w9lw.farlowconsulting.com/wp-content/uploads/2020/12/Creating-your-first-AT-D878UV-codeplug.pdf|W9LW Codeplug programming guide]]
radios/anytone_d868uv_cps.txt · Last modified: 2023/12/09 12:33 by KD6KPC