User Tools

Site Tools


radios:anytone_d868uv_cps

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
radios:anytone_d868uv_cps [2020/11/24 11:03]
kd6kpc [Export Notes]
radios:anytone_d868uv_cps [2023/12/09 12:33] (current)
KD6KPC [Supported Searches]
Line 1: Line 1:
 ====== Anytone AT-D868UV CPS ====== ====== Anytone AT-D868UV CPS ======
 +{{:radios:d868uv.jpg?400|}}
  
 To see information on the data for the radio, please refer to [[radios:anytone_d868uv|Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio]]. To see information on the data for the radio, please refer to [[radios:anytone_d868uv|Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio]].
  
-The current version of the CPS software can be downloaded [[https://bridgecomsystems.freshdesk.com/support/solutions/articles/63000105671-anytone-868-cps-firmware-and-driver-versions|here]], courtesy of BridgeCom System.+The current version of the CPS software can be downloaded [[https://support.bridgecomsystems.com/anytone-868-handheld-cps-firmware-and-driver-downloads|here]], courtesy of BridgeCom System.
  
 The RepeaterBook export has been tested with version 1.39 CPS. The RepeaterBook export has been tested with version 1.39 CPS.
Line 10: Line 11:
  
 ^ Search Page      ^ North America    ^ Rest of World       ^ ^ Search Page      ^ North America    ^ Rest of World       ^
-| Feature          | Not Supported    Not Supported                   +| Advanced State Search | <color green>Operational</color>    | <color orange>In Development</color> |   
-| Keyword          | Not Supported    Not Supported                   +| Call             | <color orange>In Development</color>    | <color orange>In Development</color> |   
-| Location         Supported        Supported           +| Favorite         | <color green>Operational</color> | <color orange>In Development</color>
-| Multi-County     Not Supported                        +| Feature          | <color green>Operational</color>  |<color green>Operational</color>  
-| Multi-State      | Not-Supported                        +| Keyword          | <color green>Operational</color> |<color green>Operational</color> 
-| Proximity        | Supported        Supported           +| Location         <color green>Operational</color><color green>Operational</color>  
-| Quick            | Supported        Supported           +| Multi-County     <color orange>In Development</color>                    
-| Nationwide       Not Supported    |                     | +| Multi-State      | <color orange>In Development</color>                    
-| Special Modes    | Supported        Supported           +| Proximity        | <color green>Operational</color><color green>Operational</color>
-| Travel           Not Supported    |                     |+| Quick            | <color green>Operational</color><color green>Operational</color>
 +| Nationwide       <color orange>In Development</color> |                     | 
 +| Special Modes    | <color green>Operational</color><color green>Operational</color>
 +| Travel           <color green>Operational</color> |                     |
  
  
Line 27: Line 31:
 =====Import/Export Fields===== =====Import/Export Fields=====
  
-**No.**Channel Number. Starts at 1 and auto-increments.+Default value in **BOLD**
 +^Field Name      ^  Value   | 
 +|No. |Channel Number. Starts at 1 and auto-increments. 
 +|Channel Name| The callsign followed by the nearest city and landmark. Truncates at 16 characters. | 
 +|Receive Frequency| Downlink frequency. | 
 +|Transmit Frequency| Uplink frequency. | 
 +|Channel Type|A-Analog for an analog-only channel (default for analog channels), D-Digital for a digital-only channel (default for DMR channels), A+D TX A for mixed analog (allow receive analog and digital signal, TX is analog), D+A TX D for mixed digital (allow receive of analog and digital signal. TX is digital.)| 
 +|Transmit Power| Low is 0.5 watts, Mid is 1 watt, **High is 2.5 watts**, Turbo is 6 watts.| 
 +|Band Width| 12.5K is default for DMR repeaters. 25K is the default for analog repeaters.| 
 +|CTCSS/DCS Decode| Repeater downlink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable.| 
 +|CTCSS/DCS Encode| Repeater uplink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable. | 
 +|Contact| **RB1**| 
 +|Contact Call Type| Group Call.| 
 +|Contact TG/DMR ID| **1**.| 
 +|Radio ID| **Null**.| 
 +|Busy Lock/TX Permit| Always, ChannelFree, Different Color Code, Same Color Code (default for DMR repeaters), Off (default for analog repeaters), Repeater, Busy.| 
 +|Squelch Mode|Carrier, CTCSS/DCS| 
 +|Optional Signal| Repeaterbook defaults to **Off**.| 
 +|DTMF ID| **1**.| 
 +|2Tone ID| **1**.| 
 +|5Tone ID| **1**.| 
 +|PTT ID| **Off**.| 
 +|Color Code| For DMR it is the repeater's color code. For analog, Repeaterbook defaults to **1**.| 
 +|Slot| **1**.| 
 +|CH Scan List| **None**.| 
 +|Receive Group List| **None**.| 
 +|TX Prohibit| **Off**.| 
 +|Reverse| **Off**.| 
 +|Simplex TDMA| **Off**.| 
 +|TDMA Adaptive| **Off**.| 
 +|Encryption Type| **Normal Encryption**.| 
 +|Digital Encryption| **Off**.| 
 +|Call Confirmation| **Off**.| 
 +|Talk Around| **On**.| 
 +|Work Alone| **Off**.| 
 +|Custom CTCSS| **251.1**.| 
 +|2Tone Decode| **0**.| 
 +|Ranging| **Off**.| 
 +|Through Mode| **Off**.| 
 +|APRS Report| **Off**.| 
 +|APRS Report Channel| **1**.|
  
-**Channel Name**: Repeaterbook uses the callsign followed by the nearest city and landmarkTruncates at 16 characters.+=====Export Notes===== 
 +This radio can only transmit and receive in analog FM and DMR modesAll other modes are automatically filtered out except when other modes are specifically selected.
  
-**Receive Frequency**: Downlink frequency.+This automatic filtering of unsupported modes may cause a discrepancy between the number of rows shown in the search results versus what is exported
  
-**Transmit Frequency**: Uplink frequency. +===== Help =====
- +
-**Channel Type**:  +
-  * A-Analog for an analog-only channel. Repeaterbook default for analog channels. +
-  * D-Digital for a digital-only channel. Repeaterbook default for DMR channels. +
-  * A+D TX A for mixed analog, allow receive analog and digital signal. TX is analog. +
-  * D+A TX D for mixed digital, allow receive of analog and digital signal. TX is digital. +
- +
-**Transmit Power**: +
-  * Low is 0.5 watts. +
-  * Mid is 1 watt. +
-  * High is 2.5 watts. Repeaterbook default. +
-  * Turbo is 6 watts. +
- +
-**Band Width**: +
-  * 12.5K. Repeaterbook default for DMR repeaters. +
-  * 25K. Repeaterbook default for analog repeaters. +
- +
-**CTCSS/DCS Decode**: Repeater downlink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable. +
- +
-**CTCSS/DCS Encode**: Repeater uplink tone. If DCS, the letter "N" is appended to the end. "Off" if not applicable. +
- +
-**Contact**: "RB1" +
- +
-**Contact Call Type**: Group Call. +
- +
-**Contact TG/DMR ID**: 1. +
- +
-**Radio ID**: Null. +
- +
-**Busy Lock/TX Permit**:  +
-  * Always. +
-  * ChannelFree. +
-  * Different Color Code. +
-  * Same Color Code. Default for DMR repeaters. +
-  * Off. Default for analog entries. +
-  * Repeater. +
-  * Busy. +
- +
-**Squelch Mode**: +
-  * Carrier +
-  * CTCSS/DCS +
- +
-**Optional Signal**: Repeaterbook defaults to Off. +
- +
-**DTMF ID**: Repeaterbook defaults to 1. +
- +
-**2Tone ID**: Repeaterbook defaults to 1. +
- +
-**5Tone ID**: Repeaterbook defaults to 1. +
- +
-**PTT ID**: Repeaterbook defaults to Off. +
- +
-**Color Code**: For DMR it is the repeater's color code. For analog, Repeaterbook defaults to 1. +
- +
-**Slot**: Repeaterbook defaults to 1. +
- +
-**CH Scan List**: Repeaterbook defaults to None. +
- +
-**Receive Group List**: Repeaterbook defaults to None. +
- +
-**TX Prohibit**: Repeaterbook defaults to Off. +
- +
-**Reverse**: Repeaterbook defaults to Off. +
- +
-**Simplex TDMA**: Repeaterbook defaults to Off. +
- +
-**TDMA Adaptive**: Repeaterbook defaults to Off. +
- +
-**Encryption Type**: Repeaterbook defaults to Normal Encryption. +
- +
-**Digital Encryption**: Repeaterbook defaults to Off. +
- +
-**Call Confirmation**: Repeaterbok defaults to Off. +
- +
-**Talk Around**: Repeaterbook defaults to On. +
- +
-**Work Alone**: Repeaterbokk defaults to Off. +
- +
-**Custom CTCSS**: Repeaterbook defaults to 251.1. +
- +
-**2Tone Decode**: Repeaterbook defaults to 0. +
- +
-**Ranging**: Repeaterbook defaults to Off. +
- +
-**Through Mode**: Repeaterbook defaults to Off. +
- +
-**APRS Report**: Repeaterbook default it Off. +
- +
-**APRS Report Channel** Repeaterbook default is 1.+
  
 +  * [[https://youtu.be/t-6HrOHMIk0|Repeaterbook YouTube Tutorial]]
 +  * [[https://w9lw.farlowconsulting.com/wp-content/uploads/2020/12/Creating-your-first-AT-D878UV-codeplug.pdf|W9LW Codeplug programming guide]]
radios/anytone_d868uv_cps.1606237414.txt.gz · Last modified: 2021/02/27 14:12 (external edit)