This is an old revision of the document!
To see information on the data for the radio, please refer to Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio.
The current version of the CPS software can be downloaded here, courtesy of BridgeCom System.
The RepeaterBook export has been tested with version 1.39 CPS.
Search Page | North America | Rest of World |
---|---|---|
Feature | Not Supported | Not Supported |
Keyword | Not Supported | Not Supported |
Location | Supported | Supported |
Multi-County | Not Supported | |
Multi-State | Not-Supported | |
Proximity | Supported | Supported |
Quick | Supported | Supported |
Nationwide | Not Supported | |
Special Modes | Supported | Supported |
Travel | Not Supported |
Many users have noticed there is sometimes a discrepancy between the number of rows shown on the website versus what is actually exported. This is caused by the export working to remove any repeaters that operate in modes that are not supported by the radio, such as D-Star.
No.: Channel Number. Starts at 1 and auto-increments.
Channel Name: Repeaterbook uses the callsign followed by the nearest city and landmark. Truncates at 16 characters.
Receive Frequency: Downlink frequency.
Transmit Frequency: Uplink frequency.
Channel Type:
Transmit Power:
Band Width:
CTCSS/DCS Decode: Repeater downlink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable.
CTCSS/DCS Encode: Repeater uplink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable.
Contact: “RB1”
Contact Call Type: Group Call.
Contact TG/DMR ID: 1.
Radio ID: Null.
Busy Lock/TX Permit:
Squelch Mode:
Optional Signal: Repeaterbook defaults to Off.
DTMF ID: Repeaterbook defaults to 1.
2Tone ID: Repeaterbook defaults to 1.
5Tone ID: Repeaterbook defaults to 1.
PTT ID: Repeaterbook defaults to Off.
Color Code: For DMR it is the repeater's color code. For analog, Repeaterbook defaults to 1.
Slot: Repeaterbook defaults to 1.
CH Scan List: Repeaterbook defaults to None.
Receive Group List: Repeaterbook defaults to None.
TX Prohibit: Repeaterbook defaults to Off.
Reverse: Repeaterbook defaults to Off.
Simplex TDMA: Repeaterbook defaults to Off.
TDMA Adaptive: Repeaterbook defaults to Off.
Encryption Type: Repeaterbook defaults to Normal Encryption.
Digital Encryption: Repeaterbook defaults to Off.
Call Confirmation: Repeaterbok defaults to Off.
Talk Around: Repeaterbook defaults to On.
Work Alone: Repeaterbokk defaults to Off.
Custom CTCSS: Repeaterbook defaults to 251.1.
2Tone Decode: Repeaterbook defaults to 0.
Ranging: Repeaterbook defaults to Off.
Through Mode: Repeaterbook defaults to Off.
APRS Report: Repeaterbook default it Off.
APRS Report Channel Repeaterbook default is 1.