This is an old revision of the document!
To see information on the data for the radio, please refer to Anytone AT-D868UV Digital DMR Dual-Band Handheld Commercial Radio.
The current version of the CPS software can be downloaded here, courtesy of BridgeCom System.
The RepeaterBook export has been tested with version 1.39 CPS.
Search Page | North America | Rest of World |
---|---|---|
Feature | Not Supported | Not Supported |
Keyword | Not Supported | Not Supported |
Location | Supported | Supported |
Multi-County | Not Supported | |
Multi-State | Not-Supported | |
Proximity | Supported | Supported |
Quick | Supported | Supported |
Nationwide | Not Supported | |
Special Modes | Supported | Supported |
Travel | Not Supported |
Default value in BOLD.
Field Name | Value |
---|---|
No. | Channel Number. Starts at 1 and auto-increments. |
Channel Name | The callsign followed by the nearest city and landmark. Truncates at 16 characters. |
Receive Frequency | Downlink frequency. |
Transmit Frequency | Uplink frequency. |
Channel Type | A-Analog for an analog-only channel (default for analog channels), D-Digital for a digital-only channel (default for DMR channels), A+D TX A for mixed analog (allow receive analog and digital signal, TX is analog), D+A TX D for mixed digital (allow receive of analog and digital signal. TX is digital.) |
Transmit Power | Low is 0.5 watts, Mid is 1 watt, High is 2.5 watts, Turbo is 6 watts. |
Band Width | 12.5K is default for DMR repeaters. 25K is the default for analog repeaters. |
CTCSS/DCS Decode | Repeater downlink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable. |
CTCSS/DCS Encode | Repeater uplink tone. If DCS, the letter “N” is appended to the end. “Off” if not applicable. |
Contact | RB1 |
Contact Call Type | Group Call. |
Contact TG/DMR ID | 1. |
Radio ID | Null. |
Busy Lock/TX Permit | Always, ChannelFree, Different Color Code, Same Color Code (default for DMR repeaters), Off (default for analog repeaters), Repeater, Busy. |
Squelch Mode | Carrier, CTCSS/DCS |
Optional Signal | Repeaterbook defaults to Off. |
DTMF ID | Repeaterbook defaults to 1. |
2Tone ID | Repeaterbook defaults to 1. |
5Tone ID | Repeaterbook defaults to 1. |
PTT ID | Repeaterbook defaults to Off. |
Color Code | For DMR it is the repeater's color code. For analog, Repeaterbook defaults to 1. |
Slot | Repeaterbook defaults to 1. |
CH Scan List | Repeaterbook defaults to None. |
Receive Group List | Repeaterbook defaults to None. |
TX Prohibit | Repeaterbook defaults to Off. |
Reverse | Repeaterbook defaults to Off. |
Simplex TDMA | Repeaterbook defaults to Off. |
TDMA Adaptive | Repeaterbook defaults to Off. |
Encryption Type | Repeaterbook defaults to Normal Encryption. |
Digital Encryption | Repeaterbook defaults to Off. |
Call Confirmation | Repeaterbok defaults to Off. |
Talk Around | Repeaterbook defaults to On. |
Work Alone | Repeaterbokk defaults to Off. |
Custom CTCSS | Repeaterbook defaults to 251.1. |
2Tone Decode | Repeaterbook defaults to 0. |
Ranging | Repeaterbook defaults to Off. |
Through Mode | Repeaterbook defaults to Off. |
APRS Report | Repeaterbook default it Off. |
APRS Report Channel | Repeaterbook default is 1. |
This radio can only transmit and receive in analog FM and DMR modes. All other modes are automatically filtered out except when other modes are specifically selected.
This automatic filtering of unsupported modes may cause a discrepancy between the number of rows shown in the search results versus what is exported.