This is an old revision of the document!
−Table of Contents
Yaesu ADMS-11
The ADMS-11 software provides editing capabilities for the FT3DR/DE memory channel frequencies, channel information, and alpha tags, using a personal computer. Also, the transceiver parameters and the setup menu items may be edited and configured.
The radio is shipped with a micro-USB cable. This cable is NOT for programming the radio. It is only for performing firmware updates. The cloning cable is about $25.
An alternative method for programming the radio is with a microSD card. A microSD card is not included with the radio but can be purchased separately.
Importing / Exporting
900 memory channels.
Supported Searches
| Search Page | North America | Rest of World |
|---|---|---|
| Favorite | Operational | In Development |
| Feature | Operational | Development Planned |
| Keyword | Operational | Development Planned |
| Location | Operational | Development Planned |
| Multi-County | Development Planned | |
| Multi-State | Development Planned | |
| Proximity | Operational | Operational |
| Proximity 2.0 | Operational | Development Planned |
| Quick | Operational | Operational |
| Special Modes | Development Planned | Development Planned |
| Travel | Operational |
Field Parameters
The ADMS-11 software can export into the CSV format only.
Repeaterbook default is BOLD. There are no headers in the file.
| Field Name | Values |
|---|---|
| Channel No | Sequential starting with 1. |
| Priority CH | ON, OFF |
| Receive Frequency | Repeater Downlink Frequency |
| Transmit Frequency | Repeater Uplink Frequency |
| Offset Frequency | In MHz |
| Offset Direction | =OFF, =-RPT, =+RPT, =+/- |
| AUTO MODE | OFF, ON |
| Operating Mode | FM, AM |
| DIG/ANALOG | FM, AMS, DN |
| TAG | ON, OFF |
| Name | User definable. Limited to 16 characters. |
| Tone Mode | OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER |
| CTCSS Frequency | Repeater Uplink Tone or 88.5 |
| DCS Code | Repeater Uplink Code or 023 |
| DCS Polarity | RX Normal Tx Normal, RX Invert TX Normal, RX Both TX Normal, RX Normal TX Invert, RX Invert TX Invert, RX Both TX Invert |
| USer CTCSS | 1600 Hz |
| RX DG-ID | Repeater Downlink DG-ID or RX 00 |
| TX DG-ID | Repeater Uplink DG-ID or TX 00 |
| Tx Power | L1 (0.3W), L2 (1W), L3 (2.5W), High (5W) |
| Skip | OFF, ON |
| AUTO STEP | ON, OFF |
| Step | null |
| Memory Mask | OFF, ON |
| ATT | OFF, ON |
| S-Meter SQL | OFF, ON |
| Bell | OFF, ON |
| Narrow | OFF, ON |
| Clock Shift | OFF, ON |
| BANK 1 | OFF, ON |
| BANK 2 | OFF, ON |
| BANK 3 | OFF, ON |
| BANK 4 | OFF, ON |
| BANK 5 | OFF, ON |
| BANK 6 | OFF, ON |
| BANK 7 | OFF, ON |
| BANK 8 | OFF, ON |
| BANK 9 | OFF, ON |
| BANK 10 | OFF, ON |
| BANK 11 | OFF, ON |
| BANK 12 | OFF, ON |
| BANK 13 | OFF, ON |
| BANK 14 | OFF, ON |
| BANK 15 | OFF, ON |
| BANK 16 | OFF, ON |
| BANK 17 | OFF, ON |
| BANK 18 | OFF, ON |
| BANK 19 | OFF, ON |
| BANK 20 | OFF, ON |
| BANK 21 | OFF, ON |
| BANK 22 | OFF, ON |
| BANK 23 | OFF, ON |
| BANK 24 | OFF, ON |
| Comment | Repeater call sign |