User Tools

Site Tools


yaesu_adms_13

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

yaesu_adms_13 [2023/02/26 10:48]
kd6kpc created
yaesu_adms_13 [2023/02/26 10:52] (current)
kd6kpc
Line 12: Line 12:
   * CSV   * CSV
  
-This version of the ADMS software is supported by RepeaterBook. A full list of the supported searches can be found [[adms-12#Supported Searches|below]].+This version of the ADMS software is supported by RepeaterBook. A full list of the supported searches can be found [[adms-15#Supported Searches|below]].
  
-The FTM-300DR supports 999 memory channels.+The FTM-6000 supports 999 memory channels.
  
 ===== Supported Searches ===== ===== Supported Searches =====
Line 37: Line 37:
 |Channel No | Sequential beginning with 1 | |Channel No | Sequential beginning with 1 |
 |Receive Frequency|| |Receive Frequency||
 +|TransmitFrequency||
 |Offset Frequency| Shift in MHz| |Offset Frequency| Shift in MHz|
 |Offset Direction| -RPT, +RPT, -/+, OFF| |Offset Direction| -RPT, +RPT, -/+, OFF|
 |Operating Mode| AM, **FM**| |Operating Mode| AM, **FM**|
-|DIG/ANALOGFMAMS, DN|+|TAGOFF**ON**|
 |Name|| |Name||
 |Tone Mode| OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER| |Tone Mode| OFF, TONE, TONE SQL, DCS, REV TONE, PR FREQ, PAGER|
 |CTCSS Frequency| Repeater uplink tone or **88.5**| |CTCSS Frequency| Repeater uplink tone or **88.5**|
 |DCS Code| Repeater uplink DCS Code or **023**| |DCS Code| Repeater uplink DCS Code or **023**|
-|User CTCSS| **1600 Hz** | +|User CTCSS| **1500 Hz** |
-|RX DG-ID| Downlink DG-ID or **RX 00**| +
-|TX DG-ID| Uplink DG-ID or **TX 00**|+
 |TX Power| **HIGH**, MID, LOW| |TX Power| **HIGH**, MID, LOW|
-|M-GRP| **OFF**| 
 |SCAN| **YES**, NO| |SCAN| **YES**, NO|
 |Step| **5.0KHz**| |Step| **5.0KHz**|
yaesu_adms_13.txt · Last modified: 2023/02/26 10:52 by kd6kpc