The CS-31PLUS is a programming software to set up the ID-31A PLUS or ID-31E PLUS from your PC.
The Icom ID-31 is a 70-cm analog and D-Star transceiver. Exports to this radio will be filtered to the 70-cm band, regardless of the search performed.
There are a couple of different areas where repeaters can be downloaded. Each area requires a different export format.
Each Memory Channel Group is limited to a maximum number of 100 channels. The total number of memory channels is 500. The total number of banks to store the channels in is 27.
Your radio came preloaded with repeaters in the Repeater List. RepeaterBook recommends saving a copy of the list to your PC in the event you would like to restore it. You can also download a current copy from the Icom site here or go to the same source Icom gets there data at dstarinfo.com.
Those two sources will only serve D-Star-capable repeaters. You can store analog repeaters from Repeaterbook.com using the Repeater List Generator.
|Search Page||North America||Rest of World|
|Ch No||Auto-incremented, beginning at 0.|
|Frequency||Repeater downlink frequency.|
|Dup||Off, DUP+, DUP-|
|Offset||Repeaterbook defaults to 5.|
|TS||Repeaterbook defaults to 25kHz.|
|Mode||FM for analog. DV for D-Star.|
|Name||Callsign, nearest city, and landmark. Limited to 16 characters.|
|SKIP||Repeaterbook defaults to Off.|
|TONE||Uplink tone - OFF, TONE, TSQL, TSQL-R, DTCS, DTCS-R, DTCS(T), Tone(T)/DTCS(R), DTCS(T)/TSQL(R), TONE(T)/TSQL(R).|
|Repeater Tone||Uplink tone.|
|TSQL Frequency||Downlink tone.|
|DTCS Code||Uplink digital code.|
|DTCS Polarity||Both N, TN-RR, TR-RN, Both R.|
|DV SQL||OFF, DSQL, CSQL.|
|DV CSQL Code||Repeaterbook defaults to 0.|
|Your Call Sign||Repeaterbook defaults to CQCQCQ.|
|RPT1 Call Sign||Repeaterbook defaults to Null.|
|RPT2 Call Sign||Repeaterbook defaults to Null.|