DMR Contact Manager is a custom-designed software package designed for use with Connect Systems CS700/CS701/CS750/CS800/CS801/CS800D radios, as well as the Tytera MD-380/390/390GPS, TYT MD2017/MD9600, AnyTone AT-D868UV and AT-D858, Retevis RT3, and similar radios that use the RDT/RDB file formats. These units are MOTOTRBO-compatible DMR mobile radios suitable for both commercial and amateur radio applications.
There is no information on the Contact Manager Website about the *.csv export/import files. I have made an attempt to determine what each column is used for. On the exported CSV file, there are no column headers.
Field | Values | Notes |
---|---|---|
Channel Name | Cannot use the following characters: - | |
Mode | FM, DMR | |
Bandwidth (kHz) | 12.5, 25 | DMR is always 12.5. |
TX Frequency (MHz) | Uplink Frequency | |
RX Frequency (MHz) | Downlink Frequency | |
Scan List | If none, then enter -NULL- | |
Squelch | TIGHT, NORMAL | Default to NORMAL |
Admit Criterion | Always, Color Code Free, CTCSS/CDCSS, Audio | Use Always for analog and Color Code Free for DMR. |
RX Ref Freq | Low, Medium, High | |
Low, Medium, High | ||
Transmitter Time-Out | ||
TOT Rekey Delay | 0-255 | Default is 0. |
Power | LOW, MID, HIGH | Default is HIGH. |
Auto Scan | Yes, No | Default is No. |
Rx Only | Yes, No | Default is No. |
Yes, No | Default is No. | |
Yes, No | Default is No. | |
Talk Around | Yes, No | |
CTCSS / DCS Decode | ||
CTCSS / DCS Encode | ||
QT Reverse | 120, 180 | |
Tx Signaling System | ON, OFF | Default to OFF. |
Rx Signaling System | ON, OFF | Default to OFF. |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
YES, NO | Default to NO. | |
Private Call Confirmed | YES, NO | Yes = The radio sends a confirmed private call request upon private call initiation. No = The radio sends unconfirmed private call request upon private call initiation. |
Emergency Alarm Acknowledge | YES, NO | |
Data Call Confirmed | YES, NO | Yes = The radio sends confirmed data call request upon private call initiation. No = The radio sends unconfirmed data call request upon private call initiation. |
Emergency System | Default is None. | |
Contact Name (TX) | Analog default is NONE. | |
Group List | ||
Color Code | Analog default is 15. | |
Encryption Privacy | BASIC, NONE | Set to NONE. |
Encryption Code | 1-16 | Default to 1 |
TDMA Time Slot | 1-2 | Analog default is 1. |