The Yaesu VX-7R is a tri-band HT. It can transmit on 50/144/430 MHz. The receiver is capable of 0.5 - 999 MHz (cellular blocked).

The VX-7R has a capacity for up to 900 memory channels.

A programming cable is required to interface with a PC.

The VX-7R can be programmed with the following applications:

• Yaesu VX-7 Commander
• CHIRP
• RT Systems

1. Power the radio down.
2. Attach the programming to the radio MIC/SP jack on the top of the radio (protip: Remove the antenna. It's better to turn the radio around the plug instead of turning the plug itself. The antenna tends to catch on the cable).
3. To place the radio into cloning mode, press and hold the [MON-F] key while turning the radio on (“CLONE” will appear on the display).
4. Press the [V/M] key (“CLONE WAIT” will appear on the screen).
5. Begin the export from the application.